1996-05-20 - Apple Newton specs: RAM, infrared, speed

Header Data

From: “Declan B. McCullagh” <declan+@CMU.EDU>
To: cypherpunks@toad.com
Message Hash: c696dcf37b3565f0c75a0a997096d3ac3968c4e3e22c4c6f619367b91ab62d9d
Message ID: <ElbtrZu00YUzQHj6Vs@andrew.cmu.edu>
Reply To: N/A
UTC Datetime: 1996-05-20 03:57:25 UTC
Raw Date: Mon, 20 May 1996 11:57:25 +0800

Raw message

From: "Declan B. McCullagh" <declan+@CMU.EDU>
Date: Mon, 20 May 1996 11:57:25 +0800
To: cypherpunks@toad.com
Subject: Apple Newton specs: RAM, infrared, speed
Message-ID: <ElbtrZu00YUzQHj6Vs@andrew.cmu.edu>
MIME-Version: 1.0
Content-Type: text/plain


>From a friend who's one of the best Newton developers around. An
unsolicited plug: check out his company's web site at
http://www.newts.com/

-Declan

---------- Forwarded message begins here ----------

Date: Sun, 19 May 1996 11:56:52 -0700 (MST)
To: "Declan B. McCullagh" <declan+@CMU.EDU>
From: dan@newts.com (Dan Rowley)
Subject: Re: Fwd: Is Chaum's System Traceable or Untraceable?

>>Does anyone on cpunks or ecash have an Apple Newton?  I know
that they come with infrared-- what are the specs on that
communications device?  And about the Newton itself:  can it
compile ANSI C code?  How much RAM?  Permanent storage?  Speed
of crypto operations?

Dec -
        The Newton's infrared is essentially the SHARP "ASK" protocol,
which is the same as used by the sharp wizard.  It is *not* IrDA
compatible, and Apple claims that it's a hardware problem not a software
problem.  The Newton cannot currently compile ANSI C unless you have very
close ties to Apple (internal code development is in C), but they will be
releasing C tools for the Newton within a couple of months.  The C, of
course, is not directly compiled on the Newton, but on a host Mac.  The
Newton ships with between 1 and 2 megs of internal RAM, but can be expanded
with FLASH or SRAM cards, but there's only one slot, so putting in a modem
could be tough.. ;)  The permanent storage *is* RAM.  It's all flash.  As
for speed, it depends on whether you do it in NewtonScript or C.
NewtonScript is compiled to P-Code that runs on a virtual machine, and is
really not too bad.  you can also compile to straight ARM code if you want.
The next Newton to come out will be based on the DEC StrongARM which I
understand is blindingly fast..

Hope this helps

Dan

--------
Dan Rowley
Innovative Computer Solutions
Developers of fine software for the Newton
Now, also developers for Be!






Thread